BATH 10/US12-Volt circulator with a AC power adapter and US power cord
This product is used for sample holders, such as the qpod 2e, that do not use the standard TC 1 Temperature Controller. The BATH 10/US consists of a 12-Volt DC submersible pump, a bucket, a coil of 1/8-inch ID vinyl tubing and a fitting to adapt the tubing to the pump. The package includes an AC adapter and an EIC power cord with a US-style plug for use with 120-Volt power. The bucket has a tight-fitting lid with three holes. The holes have grommets to hold the inlet tube, outlet tube and electrical cord. The hole for the electrical cord is split to permit passage of the cord.
The BATH 10 is our least expensive means of providing circulating fluid to Peltier heat exchanger. We recommend the use of an algicide to prevent the growth of numerous species of flora and fauna that will otherwise quickly overtake the standing water. (We do not provide algicide due to the expense of shipping chemicals.) Also, if the pump runs dry, it may not prime itself well. A small drop of detergent in the inlet usually solves this problem