Skip to Content To homepage

qpod 2e/FLKIT (discontinued)

qpod 2e Fluorescence Kit: temperature-controlled sample compartment with internal temperature controller and lenses for fluorescence
Product Overview

The qpod 2e/FLKIT combines the qpod sample compartment with a pair of imaging lenses and two spherical mirrors, an optimal system for using fiber optics to measure fluorescence of a temperature-controlled solution. The qpod 2e is a roughly square box about 120 mm on a side and 90 mm high. In the center is a temperature-controlled tower with optical ports on each of four sides and slit holders to control optical access. Each of the four sides of the qpod has a mounting ring for optical components, thermally stable and precisely aligned with the tower. Attach fiber optic cables to the imaging lens systems and screw them in place on adjacent sides of the qpod. The incident lens system will focus the light from the light source into the middle of the cuvette. The collecting lens system will focus the illuminated volume onto the collection fiber. The imaging lens systems have a magnification of about one. A dry gas purge of the compartment enables easy use at low temperatures down to -30 °C. The standard qpod readily achieves a high temperature of +110 °C. Operate the qpod 2e on a lab bench or build it into your own full spectroscopy system. For computer control, use program Q-Blue, provided at no charge, or write your own program utilizing simple text commands for control.

Product Features

Sample compartment with four ports for mounting optics
Rapid, precise control Peltier temperature control
Lens package for fluorescence measurements
Spherical mirrors to enhance excitation or emitted light
Optical slits for controlling light intensity
Precise stepper-motor-driven magnetic stirring
Dry gas purge for entire optical chamber
Integrated PID temperature controller
Thermometer probe input for sample temperature
NIST-traceable temperature calibration

  • Technical Specifications
    Number of cuvettes controlled
    Typical use
    Absorbance, fluorescence, Raman
    Standard cuvette size (outside)
    12.5 mm x 12.5 mm
    Optical ports per cuvette
    Optical port dimensions
    10 mm diameter round
    Built-in optical slit holders
    4 per cuvette
    Windowed jacket available
    Normal factory set temperature range
    -40 °C to +105 °C
    Temperature range easily achievable
    -15 °C to +105 °C
    Range with special techniques
    -30 °C to +105 °C
    Temperature precision
    ±0.01 °C
    Temperature accuracy
    ±0.15 °C from -20 ⁰C to +105 ⁰C
    Magnetic stirring motor type
    Magnetic stirring speed range
    1-2500 rpm
    Default stirring speed
    1200 rpm
    Stirring speed best performance
    60-1800 rpm
  • Basic Package

    qpod 2e – Temperature-controlled sample compartment
    QIL-UV (2x) – Pair of imaging lenses
    QMP-UV (2x) – Pair of mirror plugs
    Q-Blue – computer program to control temperature and magnetic stirring
    AC Adapter – 12 Volt DC power supply for the qpod 2e
    USB cable – Connection to the qpod 2e if Bluetooth is unavailable
    Bath 120 – Bucket, pump and fittings to provide circulating water to the Peltier unit
    NIST-traceable calibration and performance data
    Tool kit, containing a hex screw driver for optical adjustments, a stir bar for use in the cuvette a set assorted optical slits to limit optic access to the cuvette plastic blanks to cover unused optical ports on the qpod 2e

  • Accessories
Other Products to Consider
Back to top