Skip to Content To homepage

CARR/1mm

Cuvette carriage for a 1 mm path rectangular cell

This cuvette carriage holds a 10 x 1 mm cuvette (12.5 x 3.5 mm outside dimensions) in the CD 250 cuvette holder. After placing the carriage in the CD 250, captured tie-down screws allow the user to screw the holder in position to make good thermal contact with the temperature-controlled base. The incident spectrometer beam passes through the 1-mm dimension of the cuvette at a z-height of 15 mm. When properly bathed in nitrogen flow, the cuvette is held in an environment free of oxygen and moisture

Back to top